HP 3PAR Operating System Software - Manual (Page 205)

Name Target Status Role Mode Options
multi.1.r96 SystemC Backup Secondary Periodic Period 5m, over_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
testvv.0 200 testvv.0 300 Synced 2009-06-29 12:01:01 PDT
testvv.1 201 testvv.1 301 Synced 2009-06-29 12:01:07 PDT
testvv.2 202 testvv.2 302 Synced 2009-06-29 12:01:01 PDT
testvv.3 203 testvv.3 303 Synced 2009-06-29 12:01:05 PDT
Asynchronous Periodic Backup System (SystemC) Information for SLD Configurations
When all systems are up, the showrcopy command output on the asynchronous periodic backup
system (SystemC) looks like the following output for SLD configuration:
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
SystemA 42 IP ready mirror_config
SystemB 44 IP ready mirror_config
Link Information
Target Node Address Status Options
SystemA 0 10.100.33.96 Up
SystemA 1 10.101.33.96 Up
SystemB 0 10.100.33.195 Up
SystemB 1 10.101.33.195 Up
receive 0 receive Up
receive 1 receive Up
Group Information
Name Target Status Role Mode Options
multi.1.r96 SystemA Started Secondary Periodic Period 5m, over_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
testvv.0 300 testvv.0 100 Synced 2009-06-29 12:01:01 PDT
testvv.1 301 testvv.1 101 Synced 2009-06-29 12:01:07 PDT
testvv.2 302 testvv.2 102 Synced 2009-06-29 12:01:02 PDT
testvv.3 303 testvv.3 103 Synced 2009-06-29 12:01:05 PDT
Name Target Status Role Mode Options
multi.1.r96 SystemB Backup Secondary Periodic Period 5m, over_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
testvv.0 300 testvv.0 200 Synced 2009-06-29 12:00:40 PDT
testvv.1 301 testvv.1 201 Synced 2009-06-29 12:00:39 PDT
testvv.2 302 testvv.2 202 Synced 2009-06-29 12:00:40 PDT
testvv.3 303 testvv.3 203 Synced 2009-06-29 12:00:41 PDT
System Information during Failover for SLD Configurations
Synchronous Mode System Information during Failover
When a failure occurs on systems with synchronous mode volume groups such that all links between
the systems are broken, the following actions occur:
•
After 15 seconds, the system marks the sending links as Down.
•
After another 15 seconds, the system marks the targets as failed.
System Information during Failover for SLD Configurations 205