HP 3PAR Operating System Software - Manual (Page 183)

First Primary System (System2)
When all systems are up, the showrcopy command output on one of the primary systems (System2)
looks like the following output for N-to-1 configuration:
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
System1 11 IP ready mirror_config
Link Information
Target Node Address Status Options
System1 0 10.100.33.63 Up
System1 1 10.101.33.63 Up
receive 0 10.100.33.63 Up
receive 1 10.101.33.63 Up
Group Information
Name Target Status Role Mode Options
periodic_group_1 System1 Started Primary Periodic Last-Sync Thu Dec 14 18:19:17
PST 2006 , over_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
localvv.0 413 remotevv.0 21 Syncing (10%) NA
localvv.1 414 remotevv.1 22 Syncing (15%) NA
Second Primary System (System3)
When all systems are up, the showrcopy command output on another primary system (System3)
looks like the following output for N-to-1 configuration:
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
System1 4 IP ready mirror_config
Link Information
Target Node Address Status Options
System1 0 10.100.33.63 Up
System1 1 10.101.33.63 Up
receive 0 10.100.33.63 Up
receive 1 10.101.33.63 Up
Group Information
Name Target Status Role Mode Options
periodic_group_2 System1 Started Primary Periodic Last-Sync Thu Dec 14 18:19:12
PST 2006 , over_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
localvv.0 385 remotevv.2 23 Syncing (15%) NA
localvv.1 386 remotevv.3 24 Syncing (15%) NA
Disaster Recovery for N-to-1 Configurations 183