HP 3PAR Operating System Software User Manual
Page 179
6.
Verify that failback is complete and the natural direction of data flow is restored:
a.
Issue the showrcopy command on the failover system (System2).
b.
Verify that the Role of the secondary volume group is Secondary.
The following showrcopy output for System2 shows that group sync_group_1.r96
is correctly restored to Secondary:
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
System1 2 IP ready mirror_config
Link Information
Target Node Address Status Options
System1 0 10.100.33.96 Up
System1 1 10.101.33.96 Up
receive 0 10.100.33.96 Up
receive 1 10.101.33.96 Up
Group Information
Name Target Status Role Mode Options
sync_group_1.r96 System1 Started Secondary Sync
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
remotevv.0 375 localvv.0 413 Synced Thu Dec 14 18:01:12 PST 2006
remotevv.1 376 localvv.1 414 Synced Thu Dec 14 18:01:13 PST 2006
Name Target Status Role Mode Options
sync_group_2 System1 Stopped Primary Sync
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
localvv.0 385 remotevv.0 423 Stopped Thu Dec 14 17:51:48 PST 2006
localvv.1 386 remotevv.1 424 Stopped Thu Dec 14 17:51:44 PST 2006
c.
Issue the showrcopy command on the recovered system (System1).
Recovering from Disaster for 1-to-1 Configurations
179