HP 3PAR Operating System Software - Manual (Page 58)

◦ —WWN of the target node (node 2FF70002AC0000C3 on SystemB).
◦
: —FC adapter port on the primary system (SystemA), expressed as
node:slot:port, and the WWN of the peer port on the target system (SystemB)
(0:1:1:20210002AC0000C3 and 1:3:2:21210002AC0000C3).
•
For RCIP:
# creatercopytarget IP : :
where:
◦ —Name of the remote-copy target system (SystemB).
◦
IP —Specifies an IP link.
◦
: —Node on SystemA that contains the IP connections to the
target system, expressed as node:slot:port, and the IP address for the target system
(SystemB) (2:4:1:10.100.33.195 and 3:4:1:10.101.33.195).
58 Setting Up SLD Remote Copy