HP 3PAR Operating System Software - Manual (Page 193)

Target Node Address Status Options
System2 0 10.100.33.61 Up
System2 1 10.101.33.61 Up
System3 0 10.100.33.11 Up
System3 1 10.101.33.11 Up
receive 0 10.100.33.61 Up
receive 1 10.101.33.61 Up
Group Information
Name Target Status Role Mode Options
periodic_group_1 System2 Started Primary Periodic over_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
localvv.0 21 remotevv.0 413 Syncing NA
localvv.1 22 remotevv.1 414 Syncing NA
Name Target Status Role Mode Options
periodic_group_2 System3 Started Primary Periodic over_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
localvv.2 23 remotevv.0 385 Syncing NA
localvv.3 24 remotevv.1 386 Syncing NA
First Backup System (System2) for 1-to-N Configurations
When all systems are up, the showrcopy command output on one of the backup systems (System2)
looks like the following output for 1-to-N configuration:
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
System1 11 IP ready mirror_config
Link Information
Target Node Address Status Options
System1 0 10.100.33.96 Up
System1 1 10.101.33.96 Up
receive 0 10.100.33.96 Up
receive 1 10.101.33.96 Up
Group Information
Name Target Status Role Mode Options
periodic_group_1.r96 System1 Started Secondary Periodic Last-Sync Thu Dec 14
18:19:17 PST 2006 , over_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
remotevv.0 413 localvv.0 21 Syncing (10%) NA
remotevv.1 414 localvv.1 22 Syncing (15%) NA
Second Backup System (System3) for 1-to-N Configurations
When all systems are up, the showrcopy command output on the other backup system (System3)
looks like the following output for 1-to-N configuration:
# showrcopy
Remote Copy System Information
Disaster Recovery for 1-to-N Configurations 193