HP Insight Control Software for Linux - Manual (Page 157)

If Warnings Are Reported
If one or more warnings are reported in the Warning column, use the analyze option to obtain
an analysis of the problem. When possible, the command output provides potential corrective
action or the reasons for a given state. For example:
# nrg --mode analyze
Nodelist Description
----------------------- ---------------------------------------------------
neptune If 'data is state', then
look at the status of the 'Supermon Metrics
Monitor'on either the controlling management_hub or
on the management_server node as they collect and
report the data for these entries.
neptune Data may be stale, look at the
status of the Supermon Metrics Monitor as it
provides the status for this service. The data can
be stale if the hub is failing to communicate with
the master or if supermon & mond are not
collecting the data from the specific node.
neptune Thresholds defined in
nagios_vars.ini have exceeded the warning levels
for any of the locally monitored file systems, /,
/var, or /tmp.
19.5 Verifying successful configuration of the monitoring services 157