KYORITSU 6315 Instruction Manual - Manual (Page 97)

List display of the measured values KEW6315
- 95 - KEW6315
3P3W3A (Three-phase 3-wire) 3P4W (Three-phase 4-wire)
“Switching the type of displayed values”
The displayed values can be switched between Inst, Avg, Max and Min values with key. If the
selected interval is “1 sec”, Inst, Avg, Max and Min values will be the same since the display update is
also “1 sec”.
“Wh” Integration value
Press the (Wh) key and switch the screens to view integration values. Please refer to
“6.2 Integration value [Wh]” (P. 100) in this manual.
“Zoom”
Four or eight measured values can be zoomed and displayed on one screen by pressing the
(Zoom) key. Please refer to “Zoom display” (P. 96) in this manual.
“Trend graph”
Press the (Trend) key to show the trend graphs. The displayed time area is from present to
the past 60 min. Please refer to “Displaying Trend graph” (P. 97) in this manual.
“Customize”
Press the (Customize) key to switch the displayed items and change the display positions.
Please refer to “Changing displayed items and display position” (P. 99) in this manual.
Measured
values on
1ch
(V12/A1)
Measured
values on
2ch
(V23/A2)
Sum of 1, 2 and 3ch
Measured
values on
3ch
(V31/A3)
Measured
values on
1ch
(V1/A1)
Measured
values on
2ch
(V2/A2)
Sum of 1, 2 and 3ch
Measured
values on
3ch
(V3/A3)