KYORITSU 6315 Instruction Manual - Manual (Page 80)

KEW6315 Settings for system environment
KEW6315 - 78 -
“Date format”
Select a desired date display format. The selected date format will be reflected to the date display on the screen
and on each setting window.
Selection
YYYY/ MM/ DD / MM/ DD/ YYYY / DD/ MM/ YYYY
* Default setting is highlighted in gray. Changes made by user will not be cleared after system reset.
Move the blue highlight to “Date format”. Show the pull-down menu.
Select a desired date format. Confirm. Cancel.
“CH color”
Specify the colors for voltage and current per CH. The colors will be reflected into the characters on item label
and lines on the graph and wiring diagram.
Selection
White/ Yellow/ Orange/ Red/ Gray/ Blue / Green
The selected colro for VN is refected into the wiring diagram only.
* Default color setting is: VN: Yellow/ 1CH: Red/ 2CH: White/ 3CH: Blue / 4CH: Green.
Changes done by user will not be restored to default even after the system is reset.
Move the blue highlight to “CH Color”. Show the color setting window.
Select colors. Confirm. Cancel.