KYORITSU 6315 Instruction Manual - Manual (Page 89)

Type of the saved data KEW6315
- 87 - KEW6315
Type of the saved data
Data file handling
The file name will be assigned automatically. File no. is kept and saved, even after powering off the
instrument, until the system is reset. The file number will increase until it exceeds the max file number.
If a file with the same file name already exists, the files in the data folder will be saved as another name
with a different file number. The file number will be automatically increased by 1. However, “Print screen”
and “Setting” files will be overwritten in such a case. When the file number starts from “0” or one same
SD is used for multiple instruments, extra cautions should be paid so that necessary files will not be
overwritten. When all the file numbers are used for each type of data, the files on the data folder will be
overwritten.
If files are deleted or the name of folder or file are changed on a PC, editing on the instrument or data
analysis with special software cannot be performed. Please do not change the name of folder or file.
“Print screen”
Press the to save the screen images as BMP files.
File name: PS- SD 000 .BMP
| | |
Dest. code
SD:SD card
ME:Internal memory
File No.
(000-999)
Extension
(BMP file)
* Dest. = Destination
“KEW6315 Setting”
Press the key and move to “Saved data” tab, and then select “Save Settings”.
File name: SUP S 0000 .PRE
| |
Dest. code
S:SD card
M:Internal memory
File No.
(0000-9999)