KYORITSU 6315 Instruction Manual - Manual (Page 74)

KEW6315 Settings for recording items
KEW6315 - 72 -
Settings for recording items
The possible recording time on SD cards or the internal memory varies depending on the number of the
recorded items and the preset intervals. Select “Do not record” for the items which are not necessary to be
recorded to secure a longer recording time. The details are described in “Possible recording time”(P. 76).
“Power”
The blue highlight cannot locate on this area. This is just to make sure all the items related to electric power
are always recorded.
“Harmonics”
Select “Record” or “Do not record” the harmonics of voltage, current and power.
Selection
Record/ Do not record
* Default setting is highlighted in gray.
“Event”
Select “Record” or “Do not record” the detailed data when power quality events occur. The “Do not record”
is not selectable when “AUTO”* is set for “A Range”. To select “Record”, set it to any other proper current
ranges other than “AUTO”.
* Measurements complied with IEC61000-4-30 Class S cannot be performed with “AUTO” setting.
Selection
Record/ Do not record
* Default setting is highlighted in gray.
Move the blue highlight to “Harmonics”/ “Event”. Show the pull-down menu.
Select “Record” or “Do not record”. Confirm. Cancel.