GW Instek GDM-8261 User Manual - Manual (Page 99)

STORE/RECALL
99
1st display Shows the memory number
4. Select the memory number
using the Up/Down key or
select Del-All to delete the save
settings in memory.
5. Press the Enter key to confirm
your selection. Press the Exit
key to go back to the default
display.
AUTO
ENTER
/ EXIT SHIFT
Note The current instrument settings have been saved.
To enable the settings at power up, follow the
instructions in the next section.
Recall Instrument Settings
Background The Recall function enables saved settings or default
settings to be recalled at power up.
Parameter Recall (0-5), 0 = recall default settings
Recall
Instrument
Setting 1. Press the Shift key followed by
the 2nd (Menu) key. The
SYSTEM menu appears.
/ EXIT SHIFT
2ND
MENU
2. Press the Down key followed by
the Left key two times. The
Recall menu appears.
HOLD HOLD
3. Press the Down key to enter the
Recall menu.