GW Instek GDM-8261 User Manual - Manual (Page 13)

GETTING STARTED
13
Sense HI
Terminal W
4W
SENSE
Accepts HI sense line in 4W resistance
measurement. For details, see page 33.
Input Lo Terminal
500V
MAX
COM
Accepts ground (COM) line in all
measurements except the sense line in
4W Resistance (page 33).
The maximum withstand voltage
between this terminal and earth is
500Vpk.
Input Hi Terminal
MAX
DC1000V
AC 750V
INPUT
V W
Used as an input port for all
measurements except for DC/AC
Current measurements.
DC/AC 10A
Terminal MAX
10A
Accepts DC/AC Current input.
For DCI or ACI details, see page 32.
Main Display
Output On/Off
key
ON/OFF
Turns the display on or off. When the
display is turned off, all panel keys
except the Output On/Off key become
disabled. The Output On/Off key is On
by default.
Measurement Keys (upper row)
SHIFT/EXIT / EXIT SHIFT The Shift key is used to select the
secondary functions assigned to
each front panel key. When pressed,
the SHIFT indicator appears in the
display.
As the Exit key, it gets out of the
parameter configuration mode and
goes back to the measurement result
display mode.
ACV
ACV
Measures AC Voltage (page 27).