GW Instek GDM-8261 User Manual - Manual (Page 40)

GDM-8261 User Manual
40
Select Beeper Setting
Background Beeper setting defines how the GDM-8261 notifies the
continuity test result to the user. When the Beeper setting
is off it will also turn the keypad sound off.
Beeper
parameter Pass Beeps when the test result is pass
Fail Beeps when the test result is fail
Off Beep function is turned Off
1. Activate
beeper setting
menu 1. Press the Shift key followed by
the 2nd (Menu) key. The system
menu appears.
/ EXIT SHIFT
2ND
MENU
2. Press the Down key. The beep
menu appears.
3. Press the Down key. The beep
setting appears.
2. Select the
beep setting To change the setting, press the
Up/Down key.
Beeper type: Pass (beep when pass), Fail (beep when
fail, default), Off (beep off)
3. Go back to the
default display Press the Enter key to confirm.
Press the Exit key to go back to the
default display.
AUTO
ENTER
/ EXIT SHIFT