GW Instek GDM-8261 User Manual - Manual (Page 85)

SYSTEM/DISPLAY CONFIGURATION
85
Panel operation 1. Press the Shift key, the 2nd
(Menu) key followed by the
Right key. The MEAS menu
appears.
/ EXIT SHIFT
2ND
MENU
TRIG
2. Press the down key followed by
the left key twice. The AC
Bandwidth menu appears. HOLD HOLD
3. Press the Down key. The input
bandwidth setting appears.
1st display Shows the bandwidth setting
4. Select the setting using the
Up/Down keys.
5. Press the Enter key to confirm
your selection. Press the Exit
key to go back to the default
display.
AUTO
ENTER
/ EXIT SHIFT