GW Instek GDM-8261 User Manual - Manual (Page 73)

ADVANCED MEASUREMENT
73
3. View Data S DC AUTO
MATH
1st display Shows the current count
number/measurement
2nd display Indicates the count measurement mode.
MATH Indicates Math operation
Press the 2nd key to cycle through
the different statistical data
measurements.
2ND
COUNT Indicates the current measurement
count
MIN Indicates the minimum data value
MAX Indicates the maximum data value
AVG Indicates the mean (average) value
STDEV Indicates the standard deviation of the
data
Stop/Restart
Measuring Press the SHIFT key and the
OUPUT key to stop or restart
measuring.
/ EXIT SHIFT
ON/OFF

S: Indicates the measurement has started
P: Indicates the measurement has stopped
Exit Press the SHIFT key and the 2/4W
key to exit.
/ EXIT SHIFT
2/4W
MATH