GW Instek GDM-8261 User Manual - Manual (Page 150)

GDM-8261 User Manual
150
3. Press the Down key. The MAC
address appears.
4. Press the Exit key to exit from
the configuration menu.
/ EXIT SHIFT
Configure Telnet Port
Background The GDM-8261 can set the telnet port used for virtual
private networks. By default the telnet port is set to port
23.
1.Telnet Port
Configuration 1. Press the Shift key, the 2nd
(Menu) key, and the Left key
repeatedly until the SET LAN
configuration menu appears.
Note: SET LAN will only be
available after LAN has been
activated in the I/O menu, see
page 139.
/ EXIT SHIFT
2ND
MENU
HOLD
2. Press the Down key and then
the Right key repeatedly until
the TELNET selection display
appears.
TRIG