beautypg.com

Run scan, Overview, Run scan/step – GW Instek GDM-8261 User Manual User Manual

Page 117: Continuously measures one channel

background image

SCANNER (OPTIONAL)

117

Run Scan

Overview

Scan operation
type

Scan

Measures all the specified channel ranges

at each trigger event. The timer settings

(page 112) apply to each scan.

Step

Measures a single channel in the specified

range at each trigger event. The timer

settings (page 112) apply to each channel.

Monitor

Continuously measures one channel.

Run Scan/Step

Activate
Scan/Step

1. Press the Shift key followed by

the ACV key (Scan) or DCV key

(Step).

/ EXIT

SHIFT

ACV

SCAN

/ EXIT

SHIFT

DCV

STEP

2. The STO indicator turns On. The Scan (Step) starts

running and the data is recorded. After running the

predefined count, the Scan (Step) stops running.

STO

V

m

S

AUTO

DC

Retrigger/Restart
Scan

To run the Scan (Step) again, press

the Trig key. The previous data is

overwritten by the new Scan.

TRIG

Abort Scan/Step

To abort Scan/Step or to go back to

the normal display, press the Shift

key followed by the ACV key (Scan)
or DCV key (Step) again.

/ EXIT

SHIFT

ACV

SCAN

/ EXIT

SHIFT

DCV

STEP