GW Instek GDM-8261 User Manual - Manual (Page 133)

REMOTE CONTROL
133
2. Press the Down key and then
the Right key. The SEP selection
display appears.
TRIG
3. Press the Down key. The SEP
selection menu appears.
4. Press the Up/Down key to
select the separation character.
(CR+LF/LF/CR)
5. Press the Enter key followed by
the Exit key. The SEP setting is
stored and the display goes back
to the default display.
AUTO
ENTER
/ EXIT SHIFT
Set the Return Format
Description When the VAL1?, VAL2?, TRACe:DATA? and FETCh?
queries are used, the return measurement format can be
configured in one of four ways: V (value), V+U (value,
unit), V+C (value, count#), V+U+C (value, unit,
count#). See page 194 and 194 for usage examples.
Note: The READ? query will not return values based on
the return format settings, see page 194 for details.
Format Description Example
V Value +0.503E-4
V+U Value, Unit +0.503E-4, V DC
V+C Value, Count# +0.503E-4, +00001#