GW Instek GDM-8261 User Manual - Manual (Page 139)

REMOTE CONTROL
139
Insert the
Ethernet card Insert the Ethernet card into the slot. Close the cover by
tightening the screws.
Power On Connect the power cord and turn on the power.
Initialize Execute the INIT function to initialize the LAN settings,
see page 151 for details.
Activate Ethernet Interface
Ethernet(LAN)
port activation 1. Press the Shift key, the 2nd
(Menu) key, and then the Left
key repeatedly until the I/O
configuration menu appears.
/ EXIT SHIFT
2ND
MENU
HOLD