GW Instek GDM-8261 User Manual - Manual (Page 82)

GDM-8261 User Manual
82
4. Select the level using the
Up/Down key.
5. Press the Enter key to confirm
your selection. Press the Exit
key to go back to the default
display.
AUTO
ENTER
/ EXIT SHIFT
Display On/Off Setting (+ key lock)
Background The display can be turned off when not used for a long
time. Note that when this function is used, the panel keys
are also locked except for the Output On/Off key. The
display is turned on by default. The display needs to be
switched off when using the fastest measurement speed
(2400rdg/sec). See page 90 for details.
Panel operation 1. Press the Output On/Off key
once. The display will be turned
off and the panel keys become
locked.
ON/OFF
2. To on the display and enable the
panel keys, press the Output
On/Off key again.
ON/OFF
Measurement Configuration Settings
D-Shift Settings
Background The D-Shift setting automatically shifts the decimal point
depending on the measurement. If D-Shift is turned off,
the measured readings will be displayed at the full 6
2
1
digits with a fixed decimal place. The D-Shift setting is on
by default.
D-Shift On, Off (default, On)
Panel operation 1. Press the Shift key, the 2nd
(Menu) key followed by the
Right key. The MEAS menu
appears.
/ EXIT SHIFT
2ND
MENU
TRIG