GW Instek GDM-8261 User Manual - Manual (Page 80)

GDM-8261 User Manual
80
Filter count Filter count defines the number of samples to be
averaged per reading. More samples offer low noise but
long delay. Less samples offer high noise but short delay.
Range 2 ~ 100
Filter Setting
Turn on Filter 1. Press the Shift key followed by
the MX/MN (Filter) key.
/ EXIT SHIFT
MX/MN
FILTER
1st display Shows the filter count
2nd display Shows the filter type (flashing)
2. Select the filter type using the
Up/Down key.
 
3. Move the cursor to filter count
using the Left/Right key.
Change the value using the
Up/Down key.
HOLD TRIG
4. Press the Enter key to confirm
editing. The Filter indicator
appears on the display.
AUTO
ENTER
V m
S DC
FILT
FILT Indicates manual Filter setting