GW Instek GDM-8261 User Manual - Manual (Page 146)

GDM-8261 User Manual
146
4. Use the Left/Right keys to
move the cursor to the S1 value
and select a digit.
HOLD TRIG
5. Press the Up/Down key to edit
the selected digit.
6. Press the Enter key to confirm
and automatically go onto S2.
AUTO
ENTER
7. Repeat steps 4 to 6 for S2, S3 and S4.
8. Press the Exit key to exit from
the configuration menu.
/ EXIT SHIFT
3. Gateway
Configuration 1. Press the Shift key, the 2nd
(Menu) key, and the Left key
repeatedly until the SET LAN
configuration menu appears.
Note: SET LAN will only be
available after LAN has been
activated in the I/O menu, see
page 139.
/ EXIT SHIFT
2ND
MENU
HOLD