GW Instek GDM-8261 User Manual - Manual (Page 89)

SYSTEM/DISPLAY CONFIGURATION
89
Auto-Gain
Background The Auto-Gain (A-GAIN) setting performs auto gain
correction of the internal amplifiers.
Setting Off, On (default=On)
Applicable
Measurement
Mode, Rate and
Speed settings Mode Rate Accuracy Speed Quick Speed
DCV,
DCI S  
M 
F 
TC  (No Speed setting)
Panel operation 1. Press the Shift key followed by
the 2nd (Menu) key. Press the
right key twice to choose the
SET ADC menu.
/ EXIT SHIFT
2ND
MENU
TRIG TRIG
2. Press the Down key and then
the Left key to choose A-GAIN.
Press the Down key. The
A-GAIN setting appears.
HOLD
1st display Shows A-Zero setting
3. Select the setting using the
Up/Down key.
4. Press the Enter key to confirm
your selection. Press the Exit
key to go back to the default
display.
AUTO
ENTER
/ EXIT SHIFT