GW Instek GDM-8261 User Manual - Manual (Page 57)

ADVANCED MEASUREMENT
57
Refresh Rate Function S M F
(Readings/s) Continuity / Diode 100 200 300
DCV/DCI/100Ω~
100MΩ (Accurate) 5 60 240
DCV/DCI/100Ω~
100MΩ (Quick) 30 600 2400
ACV/ACI 1.2
(sec/reading)
3.38 30
Frequency/Period 1 10 100
Selection steps 1. Press the Shift key followed by
the AUTO (RATE) key. The
refresh rate switches to the next.
/ EXIT SHIFT
AUTO
RATE
2. The refresh rate indicator shows
the current status.
S
→
M
→
F
→
S
Reading Indicator
Background The reading indicator next to the 1st display flashes
according to the refresh rate when the captured data is
updated on the display.
V m
When no data is
captured When there is no captured data, the reading indicator
flashes once every two seconds (slower than the normal
refresh rate), indicating the DMM is in the waiting mode.
Common Attribute: Manual/Automatic Triggering
Automatic
triggering
(default) The GDM-8261triggers according to the refresh rate. See
the previous page for refresh rate setting details.