GW Instek GDM-8261 User Manual - Manual (Page 147)

REMOTE CONTROL
147
2. Press the Down key and the
Right key repeatedly until the
GATEWAY selection display
appears.
Note: The gateway can only be
edited if DHCP is off.
TRIG
3. Press the Down key. The
GATEWAY address selection
appears.
G1 G4 G2 G3
The gateway address is divided in 4 groups;
G1:G2:G3:G4. The cursor will be flashing on G1
(indicated by ―X‖).
4. Use the Left/Right keys to
move the cursor to the G1 value
and select a digit.
HOLD TRIG
5. Press the Up/Down key to edit
the selected digit.
6. Press the Enter key to confirm
and automatically go onto G2.
AUTO
ENTER
7. Repeat steps 4 to 6 for G2, G3 and G4.