GW Instek GDM-8261 User Manual - Manual (Page 38)

GDM-8261 User Manual
38
Continuity Test
Background Continuity test checks that the resistance in the DUT is
low enough to be considered continuous (of conductive
nature).
1. Activate
continuity test Press the
/
key twice.
/ /
2. Continuity
mode display
appears
W
S
/ + Ω Indicates Continuity test
CONT 2nd display shows the title
3. Connect the
test lead and
measure Connect the test lead between the Ω
and the COM port. The display
updates the reading.
INPUT
V W
COM