GW Instek GDM-8261 User Manual - Manual (Page 153)

REMOTE CONTROL
153
Note
If the GDM-8261 is returned to the initial settings, a
reset is performed automatically (page 141) after exiting
the configuration menu.
Resetting the Ethernet card takes approximately 5 to 10
seconds.
The continuity icon (
/
) is used to indicate the status of
the Ethernet card after it has been reset:
/
(flashing): indicates that the Ethernet card is resetting
/
(flashing → turns off): indicates that the Ethernet
card has finished resetting.
/
(flashing → stays on): indicates that the Ethernet
card has finished resetting when the continuity function
is active (see page 38).
View Web Password Settings
Background The web password is set to 123456 by default. Only the
on/off setting of the web password can be viewed with
the GDM-8261. The web password can only be set from
the web control page, see page 156 for details.
1. Web Password
Configuration 1. Press the Shift key, the 2nd
(Menu) key, and the Left key
repeatedly until the SET LAN
configuration menu appears.
Note: SET LAN will only be
available after LAN has been
activated in the I/O menu, see
page 139.
/ EXIT SHIFT
2ND
MENU
HOLD
2. Press the Down key and then
the Left key. The WEB PW
selection display appears.
HOLD