GW Instek GDM-8261 User Manual - Manual (Page 66)

GDM-8261 User Manual
66
3. Low limit
setting
V
1st display Shows the low limit value
2nd display Indicates low limit setting
1. Use the Left/Right key to move
the cursor (flashing point)
between high/low setting, digits,
and decimal point.
HOLD TRIG
2. Change the parameter using the
Up/Down key.
3. Press the Enter key to confirm
editing. The compare
measurement starts right away.
AUTO
ENTER
4. Compare
measurement
appears
V
S AC
COMP
COMP Indicates Compare mode
2nd display Shows the compare measurement result:
Pass, High, or Low.