GW Instek GDM-8261 User Manual - Manual (Page 132)

GDM-8261 User Manual
132
2. Press the Down key. The EOL
menu appears.
3. Press the Down key. The EOL
selection menu appears.
4. Press the Up/Down key to
select the EOL character.
 
5. Press the Enter key followed by
the Exit key. The EOL setting is
stored and the display goes back
to the default display.
AUTO
ENTER
/ EXIT SHIFT
Set the Separation Character
Description The TX TERM configuration menu can set the
separation character for remote commands.
Configuration 1. Press the Shift key, the 2nd
(Menu) key, the left key
repeatedly until the TX TERM
configuration menu appears.
/ EXIT SHIFT
2ND
MENU
HOLD