GW Instek GDM-8261 User Manual User Manual

Page 108

GDM-8261 User Manual

108

Insert the
scanner

Insert the scanner bottom-side-up (already configured
according to the procedures on page 102) into the slot.

Close the cover by tightening the screws.

Power On

Connect the power cord and turn On the power.

CAUTION

Do not input voltages exceeding 250V to the front input

terminals while the scanner module is installed.

WARNING

Do not connect any leads to the front input terminals

while the scanner is active. Input signals scanned by the

scan module also appear on the front terminals.