Spectra Precision Survey Pro v4.5 Recon and Nomad Reference Manual - Manual (Page 98)

Survey Pro Reference Manual
R-90
Settings
Job Settings .
The Settings screen provides access to several individual screens that
control all hardware and software settings. The screens are provided
in an index card format.
Note: Only the cards that are available when running in GPS Mode
with the GPS module are covered in this section. For details on cards
shared by both GPS mode and Conventional Mode, refer to Page R-
36.
Receiver Settings
Job Settings Receiver
or Connect to Receiver Receiver Settings
The Receiver Settings card is used to select and activate GPS
receivers, as well as modify or create a receiver’s settings parameters.
The upper portion of the first Receiver Settings screen
lists the names of all the receiver profiles on the data
collector. The other columns list the COM Port, Brand,
and Model of the receiver defined in each profile.
Demo Mode: is a special profile that cannot be deleted
or edited. When activated, Survey Pro is put into Demo
Mode which can be used to simulate GPS measurements.
This mode is used for training and demonstration
purposes.
Receiver Settings…: opens the Receiver Setup screen
where you can set the parameters for communication
from data collector to receiver, as well as access the Rx
Settings screens where you can configure the receiver
settings.