Spectra Precision Survey Pro v4.5 Recon and Nomad Reference Manual - Manual (Page 87)

Job Menu
R-79
Breaklines… : will open the Add/Edit Break lines screen where DTM
break lines can be added or edited.
Points… : will open the Points on DTM Layer screen where the points
on the DTM layer can be viewed, new points can be imported, and
existing points can be deleted (moved to the Auxiliary layer).
3D View… : will open the 3D View screen where the DTM can be
viewed from any angle.
Layers for Staking DTM
Job View DTM Layers… .
The Layers for Staking DTM screen is used to select the non-
reference DTM layer and an optional layer where invalid objects are
stored.
Select DTM Layer: is the non-reference DTM layer used
for stake points that are stored and other objects that
exist on the surface you are staking. These points will be
used to generate a DTM surface to compare to the
reference DTM surface.
Select Auxiliary Layer: if this is checked and a point is
stored that is located outside the selected DTM
boundary, the point is automatically stored on the
Auxiliary layer. If left unchecked, a prompt will appear
when storing a point outside the boundary where you
must specify the layer to store the new point.
Layer (Auxiliary): is the layer that all points will be
stored to if they cannot be stored to the DTM layer.