Spectra Precision Survey Pro v4.5 Recon and Nomad Reference Manual - Manual (Page 434)

Survey Pro Reference Manual
R-426
Point / Location : allows you to enter either a point name or
location coordinates.
Solve : adjusts the selected points in the same direction or distance
as defined from the From point to the To point, or by the direction and
distance entered.
Rotate
Adjust Rotate .
The Rotate screen will rotate selected points around a specified point.
This is useful to correct a survey where an incorrect backsight was
used during data collection.
Tap Points… : allows you to select points by tapping
them from a map view.
To/From… : allows you to select points by typing in a
point range.
Rotation Point: The selected points will be rotated
around the point specified here. (The coordinates for the
rotation point will not change.)
Simple Angle: When selected, this allows you to enter
the deflection angle to rotate the selected points.
Old and New Azimuths: When selected, this allows you
to enter an old and new azimuth, which is used to
compute the angle to rotate the selected points.
Note: The choice made from the two options above determines which
fields will be available below.
Rotate: is the angle to rotate the selected points around the Rotation
point.