Spectra Precision Survey Pro v4.5 Recon and Nomad Reference Manual - Manual (Page 182)

Survey Pro Reference Manual
R-174
Start GPS Survey
Survey Start GPS Survey .
The Start GPS Survey wizard is used to complete the setup necessary
for any RTK GPS Survey. The Start GPS Survey wizard is opened
from the main menu, or any time you try to access data collection or
stake out functions. The steps to complete the Start GPS Survey
wizard will depend on what you have already done in the job. Each
possible screen is shown below.
Choose One Point Setup
The Start GPS Survey Choose One Point Setup screen is
used to select one point setup mode. This screen shows
when you have a new job with only one point, and when
you have not yet selected a coordinate system. Use one
point setup when you want to start a new survey at
ground level, with no extra steps required to solve the
coordinate system.
One Point Setup : displays a description of one point
setup mode.
Start Survey With One Point Setup>: opens the Choose
Base Setup screen, which will guide you through
starting the survey with the default ground coordinate
system.
Regular Setup : displays a description of Regular Setup mode.
Start Survey With Regular Setup>: opens the Choose Projection Mode
screen, which is used to help you solve the coordinate system for this
job.