Spectra Precision Survey Pro v4.5 Recon and Nomad Reference Manual - Manual (Page 234)

Survey Pro Reference Manual
R-226
• Key In Coordinate
Next > : Opens one of two possible screens depending on the choice
made for the Select a Method… field in the first screen.
Enter Control Coordinate – OPUS or NGS Data
Sheet
The purpose of this screen is to pick a data sheet point or OPUS
solution file to use as the control point source. This is the second
screen that appears when either OPUS Solution or NGS Data Sheet
was selected in the first screen.
Point : displays the name of the selected job point that
the control point source will be merged into.
Search this directory… : displays the path to look for
OPUS or NGS txt files
Browse : opens a new screen where you can select a
different path to search for OPUS or NGS txt files. On
, all .txt files in the specified directory are read and
any valid data sheet points that are within 100 meters
are then put into the drop-down list below.
Select the RINEX file, or NGS data sheet point…
: Allows
you to select any valid data sheet point found from the
drop-down list.
Details : opens a screen that lists the selected OPUS
Solution Report or NGS data sheet point details.
Next > : Opens the final screen.