Spectra Precision Survey Pro v4.5 Recon and Nomad Reference Manual - Manual (Page 422)

Survey Pro Reference Manual
R-414
Stake Road – Screen Five
This screen is used to describe the stake point before it is stored and
select if the Results screen should be displayed (described next).
Point: is the point name for the stake point being stored.
Description: is the description for the stake point being
stored. The default description is the station, side, and
distance from the centerline for the design point.
Show Results on OK: When this checkbox is checked, a
Results screen (described next) will open after tapping
from this screen.
Note: This screen will not appear if the Write Cut Sheet
Data Only (No Store Point) checkbox is checked in the
Stakeout Settings screen, although the Results screen
will still appear if the Show Results on OK checkbox was
never unchecked from this screen. (It is checked by
default.)
Stake Road – Stakeout Results
This screen shows detailed cut/fill values, which may be
needed when marking a road or offset stake.
(Close): returns you to the second Stake Road screen
where the Design point is advanced by the Increment
value.