Spectra Precision Survey Pro v4.5 Recon and Nomad Reference Manual - Manual (Page 421)

Roads Menu
R-413
Shot data: displays the measurements from the last shot.
Change… : is used to modify the current design elevation, which will
also modify the associated CUT/FILL value for the current station
being staked.
Shot : takes a shot to the prism and computes come/go, cut/fill
information.
Stake Next > : returns you to the second Stake Road screen, without
storing a stake point, where the Design point is advanced by the
Increment value.
Topo SS… : stores a side shot using the data from the last shot
taken. (This will not take a new shot.)
Store/Tape… : accesses the Stake Out Point (Tape Offset) dialog box
(Page R-305), where the staked point can be stored that includes a
specified offset. The default value is the appropriate distance
correction to the design point.
Turn Gun : (available with robotic total station) turns the total
station toward the design point.
< Back : returns to the second screen.
Store… : opens the next screen.