Spectra Precision Survey Pro v4.5 Recon and Nomad Reference Manual User Manual

Page 349

Stakeout Menu – GPS & Basic GPS Module

R-341

Note: the DTM boundary corners and TIN triangle may
not be visible depending on the current scale of the
screen.

OCCUPYING / ROVING : switches from ROVING to

OCCUPYING

mode. When ROVING, the receiver is in

dynamic mode and will calculate your position as you

move to the point. When OCCUPYING, the receiver is
switched to static mode (depending on settings) and will

calculate the most precise position for the staked point.

3D View… : opens the 3D View screen (consult the

conventional surveying Reference manual) where a 3D
view of the DTM can be viewed from any angle as well

as cut / fill information for the current location.

Note: The 3D View… button is only available when Generate TIN
w\Staked Points

is checked in the previous screen and at least three

stake points have been stored.

Store : stores a point at the current rover location with the point

name shown in the St Pt field and the description in the Desc field.

Also advances the St Pt to the next available point name.

St Pt

: is the point name that will be assigned to the next stored point.

Desc

: is the description that will be assigned to the next stored point.

: is the height of the rod.

Data

: shows the northing, easting, and elevation of the current rover

location.

Result

: shows the computed elevation of the DTM at the current

location and the cut or fill necessary to bring the elevation at the

current location to the elevation of the DTM at the current location.