Spectra Precision Survey Pro v4.5 Recon and Nomad Reference Manual - Manual (Page 426)

Survey Pro Reference Manual
R-418
Road Station and Offset
Roads Show Station .
The Road Station and Offset routine allows you to take a shot to a
prism that is positioned anywhere on the road and compute the
details of where that point is located in relation to the road. This
information can then be compared to the data from a grade sheet.
Tap Road… : opens the Tap on a Road screen where you can tap on
any road in the job to select it.
Name: displays the name of the selected road.
Begin Station: displays the station assigned to the
beginning of the road.
End Station: displays the final station in the road.
Use Station Equation: When checked, the current
station equation will be applied to the road.
Equation Settings : opens the Station Equation screen
(Page R-421) where a station equation can be configured.
Backsight… : accesses the Backsight Setup screen (Page
R-114).
Next > : takes you to the next Road Station and Offset
screen where the slope staking parameters are set up.