Spectra Precision Survey Pro v4.5 Recon and Nomad Reference Manual User Manual

Page 134

Survey Pro Reference Manual

R-126

HA , ZA , SD : allows you to replace the current repetition data for

the corresponding button with new data. Once tapped, the repetition

data for the tapped button will be deleted. You will then need to
perform all sets defined in the Number of Sets field again, where the

new data will replace the corresponding deleted data.

All : will open a screen that asks if you want to add an additional set

to those already done or start over.

Toss : will delete the corresponding set that has the worst residual.

Note: A set can only be “tossed” when three or more sets have been
collected.

Side Shot : will use the repetition data gathered to create a new side

shot point. The foresight point will automatically advance to the next

available point.

Traverse : will use the repetition data gathered to create a new

traverse point. The occupy point will automatically update to the

previous foresight point and the backsight point will automatically
update to the previous occupy point.

Backsight… : accesses the Backsight Setup screen (Page R-114)

where the current backsight can be modified.

: is a shortcut to the Surveying and Repetition Settings screens