Spectra Precision Survey Pro v4.5 Recon and Nomad Reference Manual - Manual (Page 32)

Survey Pro Reference Manual
R-24
Export *.CR5 Coordinates
The Export CR5 dialog box will open when exporting
coordinates to a TDS CR5 coordinate file.
CR5 File Options: specifies if the resulting file should be
Sequential or Non-Sequential. (The HP 48 data collector
can only use sequential coordinate files.)
< Back : returns to the previous screen.
Export : exports the selected coordinates to the new CR5
file.
Export *.TXT Coordinates
Since the coordinates in an ASCII *.TXT file can be
stored in a variety of formats, two screens are used to
define the format of the resulting file.
Delimiters: is the character that separates each column
of text in the ASCII file.
Coordinates: is used to select if the resulting
coordinates should be plane coordinates, geodetic
coordinates in degrees-minutes-seconds format, or
geodetic coordinates in decimal format.
Units: are the distance units that will be written to the
resulting TXT file. These units are automatically set to
the same units that are set for the current job.
; Headers in the first row : When checked, a heading
describing each column is inserted in the first row. For
example, the following header could be inserted:
Name,Northing,Easting,Elevation,Description
< Back : returns to the previous screen.
Next > : opens the second screen.