Spectra Precision Survey Pro v4.5 Recon and Nomad Reference Manual - Manual (Page 293)

Stakeout Menu
R-285
2. The Angle Right value is changed to zero to reflect the change. The
instrument now needs to be turned horizontally to zero to face the
current target location.
3. To prevent errors if this button is used, the backsight set up is
invalidated when exiting the Stakeout dialog. A circle zeroed on a
design point is meaningless once the design point has been
staked.
Note: The Circle Zero button is not available when using a robotic
total station.
< Back : returns to the previous screen.
Stake > : opens the next screen.
Offset Staking – Screen Five
Height of Rod: is the length of the rod.
Design Elev: displays the current design elevation,
which can be modified with the Change… button.
FORWARD / BACK: indicates if the rod must move
forward (toward the total station) or backward (away
from the total station).
Go RIGHT / Go LEFT: indicates if the rod must move to
the right or left from the total station’s point of view.
EDM: This button can be toggled to shoot in various
EDM modes. The options available depend on the total
station being used. Consult the total station’s
documentation for more information on the EDM
modes that it supports.
CUT / FILL: displays the required amount of cut or fill to bring the
stake point to the design point’s elevation.
Rod Elev: displays the elevation at the rod’s location computed from
the last shot.