beautypg.com

Raw data note, View dtm – Spectra Precision Survey Pro v4.5 Recon and Nomad Reference Manual User Manual

Page 86

background image

Survey Pro Reference Manual

R-78

Raw Data Note

Enter any note to append to the raw data file. You can

use the buttons to insert common linework commands.

When finished, tap Write Now! to append the note to the
end of the raw data file.


View DTM

Job View DTM

.

Before viewing a DTM, the Setup DTM 3D screen will open where the

DTM layers must be defined. This screen is also used to define other

parameters for the DTM.

Layers : opens the Layers for Staking DTM screen

where the DTM layers are selected.

Boundary : opens the Choose Polyline screen where a

polyline can be selected that defines the boundary of the

DTM.
Exclude points…: will move any points that exist
outside the selected boundary to the Auxiliary layer. If a

point is later stored outside the boundary, they will also

be moved to the Auxiliary layer.
Discard the boundary…: will initially move any points

that exist outside the boundary to the Auxiliary layer. If
a point is later stored outside the boundary, the selected

boundary is automatically unselected.

Clear : will unselect the selected boundary and move it to the

Auxiliary layer.