Spectra Precision Survey Pro v4.5 Recon and Nomad Reference Manual - Manual (Page 154)

Survey Pro Reference Manual
R-146
Record Mode
Survey Record Mode .
When running in Record Mode, all control of the total station is
performed from the total station’s keypad. The data collector will
simply log each shot that is taken from the total station.
This routine is typically used for topo work, where the total station
remains over a single occupy point during all shots.
Note: Not all total stations support record mode.
Foresight: is the point name that will be used when
storing the next point. Once a point is stored, it will be
incremented to the next available point.
Description: is the description for all the shots that are
stored.
HR: is the length of the rod.
: opens the Smart Target options (Page R-444).
Start Recording : starts recording all shots performed
from the total station.
Stop : stops record mode.
Backsight… : accesses the Backsight Setup screen (Page
R-114) where the current backsight can be modified.
: is a shortcut to the Surveying Settings screen (Page R-44).