Spectra Precision Survey Pro v4.5 Recon and Nomad Reference Manual - Manual (Page 199)

Survey Menu – GPS Module
R-191
Occupy Data Points Screen
The Occupy Data Points screen is used to collect measurements to
new points. This screen is used to occupy a point, occupy an offset
reference point, and for feature collection.
Local Coordinates
: displays the local coordinates
computed from the current geodetic measurement.
Solution Quality: displays the quality of the current
measurement: the solution type, the number of satellites
used, and the horizontal and vertical precision computed
by the receiver. These values are explained with the GPS
Status screen (Page R-168)
Session Time
: displays the total occupation time so far
for this measurement.
Count Status
: displays Measuring when you have current
coordinates from the receiver and the screen is updating
with the latest measurement. If you are using Epoch
Averaging, Averaging is displayed after you tap Store
while the number of epochs is averaged in Survey Pro.
Suspended
is displayed if you are not receiving valid data from the
receiver.
Store : prompts you for description, layer, and attribute (depending
on your Survey settings) for the new point, then returns to the
previous screen.
GPS Status : opens the GPS Status screen (Page R-168).