Spectra Precision Survey Pro v4.5 Recon and Nomad Reference Manual - Manual (Page 299)

Stakeout Menu
R-291
Results : This will display the following additional cut, fill, and
location information:
• Type of slope (e.g. left/right, cut/fill)
• Design and observed slope ratios (run over rise)
• Design and actual stations
• HD and Cut/Fill to Hinge Point
• HD and Cut/Fill to Center Line
• If applicable, HD and Cut/Fill to Edge of Pavement
and Edge of Curb
• Name of segment and HD and Cut/Fill to that
segment extremity (Road Slope Stake only)
Note: The Results button is only available from the Store Catch Point
screen (Screen 5, below) when using GPS or Remote mode, which is
accessed after tapping Store >.
The button described below selects which information is displayed on
the screen from the following options:
• Vertical Map : displays a cross-sectional view at the current
station.
Note: When you tap a map view, an expanded view of the same map
will fill the screen.
Note: The Vertical Map will show an X at the location of each
previous shot. This can be useful in determining if the current
terrain will never intersect the slope (no catch point).
• Horizontal Map : displays an overhead view of the job.
• Shot Data : displays the shot data for the latest shot.
The button described below selects the type of slope that will be used
between the catch point and hinge point from the following options: