Spectra Precision Survey Pro v4.5 Recon and Nomad Reference Manual - Manual (Page 423)

Roads Menu
R-415
Road Slope Staking
Roads Slope Staking .
The Road Slope Staking screen is used to locate the catch point of the
road at any station.
Tap Road… : opens the Tap on a Road screen where you
can tap on any road in the job to select it.
Name: displays the name of the selected road.
Begin Station: displays the station assigned to the
beginning of the road.
End Station: displays the final station in the road.
Use Station Equation: When checked, the current
station equation will be applied to the road.
Equation Settings : opens the Station Equation screen
(Page R-421) where a station equation can be configured.
Backsight… : accesses the Backsight Setup screen (Page
R-114).
Next > : takes you to the next Road Slope Staking screen where the
slope staking parameters are set up.