Spectra Precision Survey Pro v4.5 Recon and Nomad Reference Manual - Manual (Page 328)

Survey Pro Reference Manual
R-320
Station Staking
Stakeout Station Staking .
The Station Staking routine allows you to stake the stations, offsets,
and surfaces built into a LandXML file.
The first Station Staking screen is used to load a LandXML file and
view the details of that file.
The box on the left displays the horizontal view of the
centerline include within the LandXML file and the box
on the right shows the vertical view.
Set Center Line… : allows you to select any polyline or
alignment in the current job to use as a centerline. This
will replace any centerline loaded from the LandXML
file.
View Cross-Sections… : opens the Cross-Section View
screen, described below, where you can view the station,
surface, and offset details of the loaded LandXML file.
Load From LandXML… : opens the Open screen (Page R-
14) where you can select which LandXML file to load.
Backsight… : opens the Backsight Setup screen (Page R-
114) where you can set your backsight.
Next > : opens the next Station Staking screen.