Spectra Precision Survey Pro v4.5 Recon and Nomad Reference Manual - Manual (Page 435)

Adjust Menu
R-427
Old Azimuth / Old Bearing : is a known direction between any two
points in the current job before they are rotated.
New Azimuth / New Bearing : is the direction between the same
two points specified above after the rotation.
Solve : will perform the rotation on the selected points and change
the coordinates accordingly.
Traverse Adjust
Adjust Traverse Adjust .
The Traverse Adjust wizard is a series of screens that allow you to
adjust a closed traverse for angular error and/or perform a compass
rule adjustment on a closed or open traverse.
Choose Your Traverse: is used to select a traverse to
adjust from the following options:
• Tap Polyline… : is used to tap an existing polyline
from a map view.
• To/From… : provides selection of points by point
name.
; Angle Adjust : When checked, will perform an angle
adjustment to the closed traverse. An angle adjustment
will apply the angular error equally among all of the
angles of the closed traverse and adjust the coordinates
for all but the first two traverse points. (The first leg of
the traverse is not adjusted.)
; Compass Rule : When checked, will perform a
compass rule adjustment on the selected traverse.