Yokogawa PC-Based MX100 - Manual (Page 150)

7-10
SM MX100-01E
7.3 Disassembling the MX110 6-CH Medium-Speed
Four-Wire RTD Resistance Input Module
7.3.1 Disassembling the MX110-V4R-M06
1. Remove the TR Cover, loosen the 2 screws shown in the figure below left, then
remove the Front TR Assembly. Then remove the 1 screw shown in the below
right.
Front TR Assembly
TR Cover removed
2. Remove the 4 latches from the left and right sides of the Bezel.
Right side Left side
3. Pull the Bezel in the direction of the arrow and remove it from the Module case.
Bezel Module case